You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.Youneed to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）
A: Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver.
B: Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one.
C: Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one.
D: Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
A: Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver.
B: Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one.
C: Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one.
D: Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
举一反三
- You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you did not find any USB controller there. What should you do to resolve this problem？（） A: Update the scanner drivers using certified drivers B: Enable the USB port in the computers BIOS C: Enable the USB hub controller in device manager. D: Reinstall the USB device driver and disable the USB error detection
- When you install a new device in a computer,you have to add the correct device______to the operating system to allow the computer to communicate with the device． A: application B: software C: driver D: files
- You connect an external monitor to a portable computer. You need to increase the available desktop area to include the external monitor. What should you do?（） A: From the Display properties, extend the display. B: From the Display properties, modify the resolution settings. C: Restart the computer in VGA Mode. Run dxdiag.exe. D: Restart the computer in VGA Mode. Install the most up-to-date driver for the video graphics adapter.
- You have a reference computer that runs Windows 7. You plan to create an image of the computer andthen deploy the image to 100 computers. You need to prepare the reference computer for imaging. Whatshould you do before you create the image?（） A: Run Package Manager. B: Run the System Preparation too. C: Install the User State Migration Tool. D: Install Windows Automated Installation Kit.
- You have a computer that runs Windows Vista. The computer has one partition and 1 GB of RAM. Youneed to upgrade the computer to Windows 7. What should you do first?（） A: Add 1 GB of RA B: C: Create a second partition. D: Disable User Account Control （UAC）. E: Install Windows Vista Service Pack 2 （SP2）.