要配置静态路由，需在全局配置模式中执行以下命令（）。
A: Router(config)
B: ip route destination-network subnet-mask next-hop-address | outgoing interface
C: Router(config)
D: ip address destination-network subnet-mask next-hop-address | outgoing interface
E: Router
F: ip route destination-network subnet-mask next-hop-address | outgoing interface
G: Router
H: ip address destination-network subnet-mask next-hop-address | outgoing interface
A: Router(config)
B: ip route destination-network subnet-mask next-hop-address | outgoing interface
C: Router(config)
D: ip address destination-network subnet-mask next-hop-address | outgoing interface
E: Router
F: ip route destination-network subnet-mask next-hop-address | outgoing interface
G: Router
H: ip address destination-network subnet-mask next-hop-address | outgoing interface
举一反三
- 如果你打算配置路由器的接口IP地址，应该使用哪个命令 A: router(config-if)# ip address 142.8.2.1 subnet mask 255.255.252.0 B: router(config-if)# 142.8.2.1 0.0.3.255 C: router(config-if)# ip address 142.8.2.1 subnet mask /22 D: router(config-if)# ip address 142.8.2.1 255.255.252.0
- 以下哪个命令是配置IP地址池的子网地址和子网掩码的______ A: ip dhcp excluded—address B: network address mask C: default—router address D: ip dhcp pool
- [Router] ip pool pool1 [Router-ip-pool-pool1] network 10.10.10.0 mask 255.255.255.0 [Router-ip-pool-pool1] gateway-list 10.10.10.1 [Router-ip-pool-pool1] quit [Router]ip pool pool2 [Router-ip-pool-pool2] network 10.20.20.0 mask 255.255.255.0 [Router-ip-pool-pool2] gateway-list 10.20.20.1 [Router-ip-pool-pool2] quit [Router] interface gigabitethernet 1/0/0 [Router-GigabitEthernet1/0/0] ip address 10.10.10.1 24 [Router-GigabitEthernet1/0/0] dhcp select global 管理员在Router上进行了如上配置,那么连接在该路由器的G1/0/0接口下的一台主机，能够通过DHCP获取到什么样的IP地址
- Which IP address is a network address?
- 在DHCP Pool配置模式下，配置IP地址默认网关的命令是（）。 A: network＜network-number＞＜mask |/prefix-length＞ B: default-router address[address2…address8] C: domain-name＜name＞ D: dns－server address[address2…address8]