将交换机的端口生成树成本设置为30,使用以下哪个命令
A: uijie(config)
B: spanning-tree cost 30
C: uijie(config-if-fastethernet0/1)
D: spanning-tree cost 30
E: uijie(config)
F: spanning-tree priority 30
G: uijie(config-if-fastethernet0/1)
H: spanning-tree path-cost 30
A: uijie(config)
B: spanning-tree cost 30
C: uijie(config-if-fastethernet0/1)
D: spanning-tree cost 30
E: uijie(config)
F: spanning-tree priority 30
G: uijie(config-if-fastethernet0/1)
H: spanning-tree path-cost 30
举一反三
- 将交换机的端口生成树成本设置为30,使用以下哪个命令? A: scitc(config)#spanning-treecost30 B: scitc(config-if-fastethernet0/1)#spanning-treecost30 C: scitc(config)#spanning-treepriority30 D: scitc(config-if-fastethernet0/1)#spanning-treepath-cost30
- 将交换机的端口生成树成本设置为30，使用以下哪个命令？ A: [Huawei]stp cost 30 B: [Huawei-Ethernet0/0/0]stp cost 30 C: [Huawei]stp priority 30 D: [Huawei]stp path-cost 30
- G is a tree, then G's spanning tree has ( ) tree. A: 1 B: 0 C: 2 D: I'm not sure
- 生成树协议(Spanning Tree Protocol)的主要作用是什么?( )
- Catalyst 3500(Cisco IOS系统)中配置UplinkFast生成树可选功能的命令格式是——。 A: set spantree uplinkfast enable B: set spantree uplinkfast enable rate C: spanning—tree vlanroot primary D: spanning—tree uplinkfast·