A: Length, constraints, section size and shape
B: Material, length and constraints
C: Material, constraints, section size and shape
D: Material, length, section size and shape
举一反三
- The compression bar belongs to a slender bar. Whether it is a medium long bar or a short thick bar is determined according to the () of the compression bar. A: length B: Cross section size C: Critical stress D: flexibility
- the factors that affect the ultimate stress are ( ). A: Load B: Material properties C: Section size D: Working conditions
- The factors that affect the working stress of members are () A: Load B: Material properties C: Section size D: Working conditions
- The slender column is under axial compressive load P, the critical load [img=23x22]1803a0faa055141.png[/img] is independent of ( ). A: the material of the column B: the length of the column C: the magnitude of the P D: the shape and dimension of the cross section of the column
- For axial compression members, because the normal stress on the cross section is evenly distributed, it is not necessary to consider the reasonable shape of the cross section
内容
- 0
The Order of cumulative Adjectives from the first to the last are article or other noun marker, evaluative word, color, nationality, religion, size, length or shape, age, material and noun/adjective.
- 1
The critical pressure of the compression bar is directly proportional to the elastic modulus of the material
- 2
If you want to describe a product, you can describe its______. A: material B: color C: shape D: size
- 3
Under the same material conditions, as the flexibility increases, ( ). A: The critical stress of the long column decreases while that of the medium flexibility bar remains unchanged. B: The critical stress of the intermediate column decreases while that of the large flexibility bar remains unchanged. C: The critical stress of the large and the intermediate column are both decreased. D: The critical stress of the large and the intermediate column are both unchanged.
- 4
For the columns with the same length, material, constraint conditions and cross-sectional area, etc., the stability of which kind of shape of cross-section (see the following figures)is best ? . And the stability of which is worst? .http://image.zhihuishu.com/zhs/onlineexam/ueditor/201904/64415e4a30114dd688f87cc28116d571.png