When entering the tool radius compensation mode from no compensation mode, the movement command can only use G01 or G00, and cannot use G02 and G03.
正确
举一反三
- When the same tool is used for roughing and finishing, the tool radius compensation function can be used to compensate the machining allowance. If the radius of the tool is r and the margin in the radial direction is Δ during finishing, the radius compensation amount during the last roughing is (). A: r B: Δ C: r+Δ D: 2r+Δ
- “G00 G01 G02 G03 X100.....”该程序中时终有效的G指令是 。 A: G00 B: G01 C: G02 D: G03
- 15.指令G00 G02 G03 G01 X-25.0 Y70.0 F100中,最终执行的G代码是( )。 A: G01 B: G00 C: G02 D: G03
- You have a single Active Directory directory service domain. You use Group Policy to assign applications. A computer named Desktop1 must be moved to a different organizational unit （OU）. Youneed to ascertain the effect that the move will have on the applications that are assigned to the computer account. What should you do？（） A: Use the RSoP tool in logging mode on Desktop1. B: Use the RSoP tool in planning mode on Desktop1. C: Use the RSoP tool in logging mode on a domain controller. D: Use the RSoP tool in planning mode on a domain controller.
- 下列G指令中，( )为非模态指令。 A: G00 B: G01 C: G02 D: G04
内容
- 0
Using the tool radius compensation function, the rough and finish machining of the same part can be realized without modifying the program.
- 1
孔加工固定循环指令可以用01组G代码（G00、G01、G02、G03、G04）来取消。（ ）
- 2
程序段G01G02G03G00X50Y70R30F70；中有效的G代码是（ ） A: G00 B: G01 C: G02 D: G03
- 3
下列G指令中()不是模态指令 A: G00 B: G01 C: G02和G03 D: G04
- 4
数控G代码中，（）是快速走刀指令。 A: G03 B: G02 C: G01 D: G00