​下列命令中，正确的是：‎ A: network 172.16.1.0 0.0.0.255 area 1 B: network 172.16.1.0 255.0.0.0 area 0 C: network 172.16.0.0 255.255.0.0 area 0 D: network 172.16.1.0 255.255.255.0 area 1

What command sequence will configure a router to run OSPF and add network 10.1.1.0 /24 to area 0?

Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?(choose two)

两台空配置的MSR路由器通过各自的GE0/0接口背靠背互连,其互连网段为192.168.1.1/30,正确配置IP地址后,两台路由器的GE0/0接口可以互通。现在分别在两台路由器上添加如下OSPF配置: ospf 1 area 0.0.0.1 network 192.168.1.0 0.0.0.3 那么下列说法正确的是( )。

命令 Router1(config-router)# network 192.168.0.0 0.0.15.255 area 100 将在 OSPF 更新中通告哪个范围的网络?

___________________ is consisting of a computer network across an entire city, college campus, or a small region. A: A Metropolitan Area Network or MAN B: A Local Area Network or LAN C: A Wireless Area Network or WAN

‌路由器需要配置为在 OSPF 区域 0 内进行路由。此操作需要使用哪两个命令？（选择两项。）‏ A: RouterA(config) B: router ospf 0 C: RouterA(config) D: router ospf 1 E: RouterA(config-router) F: network 192.168.2.0 0.0.0.255 0 G: RouterA(config-router) H: network 192.168.2.0 0.0.0.255 area 0 I: RouterA(config-router) J: network 192.168.2.0 255.255.255.0 0

智慧职教: 三台MSR路由器通过图示的方式连接。 三台路由器都属于OSPF Area 0， 同时在Area 0里通过network命令发布了三台路由器的互连网段。 在 RTC 上， 网段 NET-1 也通过network 命令在 OSPF Area 0 中发布了。三台路由器之间的 OSPF Cost如图所示。目前三台路由器的邻居状态稳定，那么______。 855af999eb1d99229bc87cd78b8ed060

VLAN 是的缩写: virtual local area network|virtual local area networking|virtual long area network|virtual long area networking

CAN总线的英文全称（） A: Controller Area Network B: Controll Area Network C: Controller Area Net D: Controll Area Net