• 2022-05-31 问题

    中国大学MOOC: On a line chart, the x-axis is also called the dependent axis because its values depend on those of the y-axis.

    中国大学MOOC: On a line chart, the x-axis is also called the dependent axis because its values depend on those of the y-axis.

  • 2022-05-31 问题

    ()loaded columns, where the loads are applied at any point on the column section, causing moments about both the x axis and y axis simultaneously

    ()loaded columns, where the loads are applied at any point on the column section, causing moments about both the x axis and y axis simultaneously

  • 2022-05-31 问题

    _______ indicates that the zero,Y,Z return is over for the respective axis X.

    _______ indicates that the zero,Y,Z return is over for the respective axis X.

  • 2021-04-14 问题

    中国大学MOOC: If a country produces good Y (measured on the vertical axis) and good X (measured on the horizontal axis), then the absolute value of the slope of its production possibility frontier is equal to _____________.

    中国大学MOOC: If a country produces good Y (measured on the vertical axis) and good X (measured on the horizontal axis), then the absolute value of the slope of its production possibility frontier is equal to _____________.

  • 2021-04-14 问题

    下列程序运行后,看到的图形是()。[x,y,z]=cylinder(10,40);surf(x,y,z)view(90,0);axis square

    下列程序运行后,看到的图形是()。[x,y,z]=cylinder(10,40);surf(x,y,z)view(90,0);axis square

  • 2021-04-14 问题

    下列程序的运行结果是( )。 x=[0,1,1,0,0]; y=[0,0,1,1,0]; for n=1:3 plot(n*x,n*y) hold on end axis equal

    下列程序的运行结果是( )。 x=[0,1,1,0,0]; y=[0,0,1,1,0]; for n=1:3 plot(n*x,n*y) hold on end axis equal

  • 2022-05-31 问题

    Line graphs are those that use lines or curves. They have an X-axis and Y-axis.( )

    Line graphs are those that use lines or curves. They have an X-axis and Y-axis.( )

  • 2022-06-08 问题

    纵、横坐标轴采用等长刻度的命令是 A: axis square B: axis auto C: axis equal D: axis off

    纵、横坐标轴采用等长刻度的命令是 A: axis square B: axis auto C: axis equal D: axis off

  • 2022-06-30 问题

    以下属于坐标轴控制的命令的是? A: axis auto B: axis tight C: axis fill D: axis ij

    以下属于坐标轴控制的命令的是? A: axis auto B: axis tight C: axis fill D: axis ij

  • 2022-05-31 问题

    If you want to get the axis like following figure, how to set the axis?[img=570x508]17de94b382954af.png[/img] A: axis( [ 0 10 15 -10 ] ); B: axis( [ -10 15 0 10 ] ); C: axis( [ 0 10 -10 15 ] ); D: axis( [ 0 -10 10 15 ] );

    If you want to get the axis like following figure, how to set the axis?[img=570x508]17de94b382954af.png[/img] A: axis( [ 0 10 15 -10 ] ); B: axis( [ -10 15 0 10 ] ); C: axis( [ 0 10 -10 15 ] ); D: axis( [ 0 -10 10 15 ] );

  • 1 2 3 4 5 6 7 8 9 10