哪个命令使路由器通过OSPF通告默认静态路由?( ) A: redistribute static B: network 0.0.0.0 0.0.0.0 area 0 C: default-information originate D: 默认路由仅作用于本地,不能用OSPF通告

​下列命令中，正确的是：‎ A: network 172.16.1.0 0.0.0.255 area 1 B: network 172.16.1.0 255.0.0.0 area 0 C: network 172.16.0.0 255.255.0.0 area 0 D: network 172.16.1.0 255.255.255.0 area 1

在使用network命令把接口(IP地址为10.0.8.10/24)加入OSPF进程100的区域1时,以下哪条命令是正确的?() A: [ARl-ospf-100]network 10.0.8.10 255.255.255.0 B: [ARl-ospf-100]network 10.0.8.10 0.0.0.0 C: [ARl-ospf-l00-area-0.0.0.l]network 10.0.8.10 255.255.255.0 D: [ARl-ospf-l00-area-0.0.0.1]network 10.0.8.10 0.0.0.0

What command sequence will configure a router to run OSPF and add network 10.1.1.0 /24 to area 0?

在使用network命令把接口(IP地址为10.0.8.10/24)加入OSPF进程100的区域1时,以下哪条命令是正确的?() A: [AR1-ospf-100] network 10.0.8.10 255. 255. 255.0 B: [AR1-ospf-100] network 10.0.8.10 0.0.0.0 C: [AR1-ospf-100-area-0.0.0.1]network 10.0.8.10 255.255.255.0 D: [AR1-ospf-100-area-0.0.0.1]netvrork 10.0.8.10 0.0.0.0

Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?(choose two)

如图所示,所有路由器运行OSPF协议,要求OSPF进程号为1,并且区域号为0,下列哪些命令可以在路由器RouterA上实现这个需求?[img=627x150]17e4494e3b9b87f.png[/img] A: B: ospf 1area 0.0.0.0network 10.0.12.1 0.0.0.0 C: D: ospf 1area 0.0.0.0network 10.0.12.0 0.0.0.3 E: F: ospf 1area 0.0.0.0network 10.0.12.0 0.0.0.255 G: H: interface GigabitEthernet0/0/1ip address 10.0.12.1 255.255.255.0ospf enable 1 area 0.0.0.0

命令 Router1(config-router)# network 192.168.0.0 0.0.15.255 area 100 将在 OSPF 更新中通告哪个范围的网络?

___________________ is consisting of a computer network across an entire city, college campus, or a small region. A: A Metropolitan Area Network or MAN B: A Local Area Network or LAN C: A Wireless Area Network or WAN

‌路由器需要配置为在 OSPF 区域 0 内进行路由。此操作需要使用哪两个命令？（选择两项。）‏ A: RouterA(config) B: router ospf 0 C: RouterA(config) D: router ospf 1 E: RouterA(config-router) F: network 192.168.2.0 0.0.0.255 0 G: RouterA(config-router) H: network 192.168.2.0 0.0.0.255 area 0 I: RouterA(config-router) J: network 192.168.2.0 255.255.255.0 0