Which is the Privilege EXEC mode A: Router(config-if) B: C: Router(config) D: E: Router F:

配置二层交换机端口类型为Trunk模式的命令为（ ） A: Switch B: switchport mode trunk C: Switch(config) D: switchport mode trunk E: Switch(config-if) F: switchport mode trunk G: Switch(config-line) H: switchport mode trunk

Cisco模拟器中将三层交换机的端口配置为Trunk端口类型的命令（ ） A: Switch(config-if) B: switchport trunk encapsulation dot1qSwitch(config-if) C: switchport mode trunk D: Switch(config-if) E: switchport mode trunk F: Switch(config) G: switchport mode trunk H: Switch(config-if) I: switchport mode trunkSwitch(config-if) J: switchport trunk encapsulation dot1q

请参见图示。一个第 3 层交换机路由三个 VLAN 并连接至路由器以连接 Internet。哪两个配置将应用到交换机？（请选择两项。）[img=377x304]1803bf7736feaee.png[/img] A: (config) B: interface GigabitEthernet 1/1 (config-if) C: no switchport (config-if) D: ip address 192.168.1.2 255.255.255.252 E: (config) F: interface vlan 1 (config-if) G: ip address 192.168.1.2 255.255.255.0 (config-if) H: no shutdown I: (config) J: interface gigabitethernet1/1 (config-if) K: switchport mode trunk L: (config) M: interface fastethernet0/4 (config-if) N: switchport mode trunk O: (config) P: ip routing

请参见图示。一个第 3 层交换机路由三个 VLAN 并连接至路由器以连接 Internet。哪两个配置将应用到交换机？（请选择两项。）[img=378x308]18032b8934766ed.jpg[/img] A: (config) B: interface GigabitEthernet 1/1(config-if) C: no switchport(config-if) D: ip address 192.168.1.2 255.255.255.252 E: (config) F: interface vlan 1(config-if) G: ip address 192.168.1.2 255.255.255.0(config-if) H: no shutdown I: (config) J: interface gigabitethernet1/1(config-if) K: switchport mode trunk L: (config) M: interface gigabitethernet1/1(config-if) N: switchport mode trunk

The Three-Tier model of the database system is（）. A: Up mode, mode, Down mode B: Front mode, mode, Rear mode C: External mode, mode, internal mode D: Large mode, Medium mode, Small mode

subtractive color mode refers to A: CMYK mode B: RGB mode C: HSB mode D: LAB mode

Additive color mode refers to A: RGB mode B: HSB mode C: CMYK mode D: LAB mode

What is the most common mode for a firewall？（） A:  routed mode B:  context mode C:  bridged mode D:  transparent mode E:  full security mode

P mode display A: Program exposure mode B: Aperture priority mode C: Shutter priority mode D: Manual mode