The values set in the G54 are ( ).
A: Origin of workpiece coordinate system
B: Offset of origin of workpiece coordinate system relative to origin of machine tool coordinate system
C: Length deviation value of tool
D: Offset of workpiece coordinate system origin relative to tool alignment point
A: Origin of workpiece coordinate system
B: Offset of origin of workpiece coordinate system relative to origin of machine tool coordinate system
C: Length deviation value of tool
D: Offset of workpiece coordinate system origin relative to tool alignment point
举一反三
- To set the workpiece coordinate system with G54, the tool setting point must be used as the starting point of tool movement relative to the workpiece.
- The origin of the coordinate system inherent to CNC machine tools is ( ). A: Machine origin B: Machine reference point C: Workpiece origin D: Fixture origin
- When determining the coordinate system of the CNC machine tool, which of the following principles is adopted for the movement relationship between the tool and the workpiece? ( ) A: Assuming the tool moves, the workpiece is stationary B: Assuming the workpiece moves, the tool is stationary C: It depends on the situation D: Assuming that the tool and workpiece are not moving
- (3 points) The machining process system includes (). A: machine tool, tool, fixture and workpiece B: worker, tool, fixture and workpiece C: machine tool, tool, worker and workpiece D: machine tool, tool, fixture and worker
- The technological system consists of A: machine tool B: fixture C: cutting tool D: workpiece