When determining the coordinate system of the CNC machine tool, which of the following principles is adopted for the movement relationship between the tool and the workpiece? ( )
A: Assuming the tool moves, the workpiece is stationary
B: Assuming the workpiece moves, the tool is stationary
C: It depends on the situation
D: Assuming that the tool and workpiece are not moving
A: Assuming the tool moves, the workpiece is stationary
B: Assuming the workpiece moves, the tool is stationary
C: It depends on the situation
D: Assuming that the tool and workpiece are not moving
举一反三
- (3 points) The machining process system includes (). A: machine tool, tool, fixture and workpiece B: worker, tool, fixture and workpiece C: machine tool, tool, worker and workpiece D: machine tool, tool, fixture and worker
- The values set in the G54 are ( ). A: Origin of workpiece coordinate system B: Offset of origin of workpiece coordinate system relative to origin of machine tool coordinate system C: Length deviation value of tool D: Offset of workpiece coordinate system origin relative to tool alignment point
- To set the workpiece coordinate system with G54, the tool setting point must be used as the starting point of tool movement relative to the workpiece.
- The technological system consists of A: machine tool B: fixture C: cutting tool D: workpiece
- (3 points) The core of machining process system is (). A: machine tool B: fixture C: tool D: workpiece