You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. Then you go to device manager to see the status of the USB port. The status of the USB port is shown below. What should you do to resolve this problem?()
A: Update the scanner drivers using certified drivers
B: Enable the USB port in the computers BIO
C:
D: Contact the maker or vendor for you system and obtain the current version of BIO
E:
F: Enable the USB hub controller in device manager.
A: Update the scanner drivers using certified drivers
B: Enable the USB port in the computers BIO
C:
D: Contact the maker or vendor for you system and obtain the current version of BIO
E:
F: Enable the USB hub controller in device manager.
举一反三
- You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you did not find any USB controller there. What should you do to resolve this problem？（） A: Update the scanner drivers using certified drivers B: Enable the USB port in the computers BIOS C: Enable the USB hub controller in device manager. D: Reinstall the USB device driver and disable the USB error detection
- A small USB device or data card enables you to access the Internet wherever there is a mobile phone signal.
- Never force a connector into a port. If the connector and port don’t join with reasonable ease, they probably don’t match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
- You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.Youneed to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （） A: Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. B: Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. C: Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one. D: Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
- P5: Device Manager is used to check the status of __________ and update device drivers on the computer. A: computer software B: computer hardware C: compter processor D: computer storage