Using the tool radius compensation function, the rough and finish machining of the same part can be realized without modifying the program.
举一反三
- When the same tool is used for roughing and finishing, the tool radius compensation function can be used to compensate the machining allowance. If the radius of the tool is r and the margin in the radial direction is Δ during finishing, the radius compensation amount during the last roughing is (). A: r B: Δ C: r+Δ D: 2r+Δ
- When entering the tool radius compensation mode from no compensation mode, the movement command can only use G01 or G00, and cannot use G02 and G03.
- Rough machining and fine machining should be seperated for high precision parts, the main reasons do not include item. A: Detect the blank defects early, and use the equipment reasonably B: Can correct the error caused in rough machining C: Can correct the manufacturing error of fixture and tool in the process system D: Can correct the manufacturing and installation adjustment errors of machine tools in the process system
- One of the elements constituting the process is ().<br/>A, the same machine tool B, the same fixture C, the same tool D, the<br/>same machining surface A:
- When machining the same or similar contours multiple times, in order to simplify the main program, subprograms can be used for programming.