Progmatic failure can be categorized as pragmalinguistic failure and sociopragmatic failure.

Among the main failure modes of the inclined section in flexural members, the inclined tension failure and the inclined compression failure belong to brittle failure, and the shear-compression failure belongs to ductile failure.

In case of failure of SDACs, ECAM can’t detect failure.

有缺陷的触点会导致组件故障。 A: Defective contacts can cause a failure of the unit. B: Poor contacts can cause a unit failure. C: Contacts with flaws can cause a unit failure.

The common failure characteristic for the large and small eccentrically compressed reinforced concrete members is that the concrete in compression zone reaches the concrete ultimate compressive strain at the failure.

The main difference of the failure characteristics between the large and small eccentrically compressed reinforced concrete members is whether the reinforcement on the far-side from the axial force is in tension or compression at the failure.

If [img=46x23]1803b95368d5b28.png[/img], the concrete fiber strain at the edge of the compression zone at the failure of the beam satisfies the condition [img=59x19]1803b95371d436c.png[/img], and at the same time, the tensile strain of the tensile reinforcements satisfies the condition [img=53x22]1803b95379d4907.png[/img], i.e., the tensile reinforcement has yielded at the failure of the beam, and the failure mode of such beam belongs to the over-reinforced failure.

Nothing strikes us more hurtfully than failure. Especially, in the case of people with poor self-esteem and low self-confidence, the pain and fear__6___ with failure is much more serious, damaging and debilitating. It can have a lasting and crippling__7___. Failure prevents many from being true __8___ their potential and realizing their cherished dreams. Since success and failure are __9___from our lives, as long as we are engaged in some professional activity or the other, we have to find healthy ways to __10___with our failures

The main failure modes of inclined section of flexural members can be ordered as ( ) from high to low according to the corresponding shear capacity. A: inclined tension failure > shear-compression failure> inclined compression failure B: shear-compression failure > inclined tension failure > inclined compression failure C: inclined compression failure > shear-compression failure> inclined tension failure D: shear-compression failure> inclined compression failure > inclined tension failure

It was _____________ that the policy was a failure.