This flight is routed to Chicago ____New York. (through/via)
This flight is routed to Chicago ____New York. (through/via)
智慧职教: 下面哪些协议是可路由协议)routed protocol)? ) )
智慧职教: 下面哪些协议是可路由协议)routed protocol)? ) )
What final place is a distress call/message routed to? A: CES B: NCS C: RCC D: MCC
What final place is a distress call/message routed to? A: CES B: NCS C: RCC D: MCC
交换机的三层接口分为 A: SVI B: L3 Aggregate Port C: Switch Port D: Routed Port
交换机的三层接口分为 A: SVI B: L3 Aggregate Port C: Switch Port D: Routed Port
What is the most common mode for a firewall？（） A: routed mode B: context mode C: bridged mode D: transparent mode E: full security mode
What is the most common mode for a firewall？（） A: routed mode B: context mode C: bridged mode D: transparent mode E: full security mode
As an experienced technician， you are responsible for Technical Support. Which of the followingdescriptions is correct about the characteristic of SLB one arm mode？（） A: This out-of-band approach supports scaling B: SLB· is not inline. C: Mode is not as common as bridge or routed mode. D: Return traffic requires PB·R， server default gateway pointing to SLB·， or client source NAT·
As an experienced technician， you are responsible for Technical Support. Which of the followingdescriptions is correct about the characteristic of SLB one arm mode？（） A: This out-of-band approach supports scaling B: SLB· is not inline. C: Mode is not as common as bridge or routed mode. D: Return traffic requires PB·R， server default gateway pointing to SLB·， or client source NAT·
As an experienced technician， you are responsible for Technical Support. Which of the followingdescriptions is correct about the characteristic of SLB one arm mode？（） A: This out-of-band approach supports scaling B: SLB·is not inline. C: Mode is not as common as bridge or routed mode. D: Return traffic requires PB·R， server default gateway pointing to SLB·， or client source NAT·
As an experienced technician， you are responsible for Technical Support. Which of the followingdescriptions is correct about the characteristic of SLB one arm mode？（） A: This out-of-band approach supports scaling B: SLB·is not inline. C: Mode is not as common as bridge or routed mode. D: Return traffic requires PB·R， server default gateway pointing to SLB·， or client source NAT·
62（） A: ifconfig-upeth110.1.1.2/8B．ifconfigeth110.1.1.2255.0.0.0upC．ifconfigeth110.1.1.2upnetmask255.0.0.0D．ifconfigeth110.1.1.2/8;ifconfigeth1up B: 4台Linux主机通过如图5-2所示的方式互联，则实现PC1与PC4之间互访的步骤为： C: 1．运行(61)命令关闭计算机，在PC2与PC3上添加第二块网卡(eth1)，重新启动； D: 2．在PC2与PC3上为第二块网卡分配IP地址，并激活该网络接口，对于PC3，应执行(62)； E: 3．如果使用routed作为路由器进程，则作为路由器的PC2与PC3仅支持路由协议(63)；如果在PC2与PC3上设置静态路由信息并开启路由功能，对于PC2则应执行(64)； F: 4．在PC1和PC4上配置各自的默认同关，对于PC1，应执行(65)。
62（） A: ifconfig-upeth110.1.1.2/8B．ifconfigeth110.1.1.2255.0.0.0upC．ifconfigeth110.1.1.2upnetmask255.0.0.0D．ifconfigeth110.1.1.2/8;ifconfigeth1up B: 4台Linux主机通过如图5-2所示的方式互联，则实现PC1与PC4之间互访的步骤为： C: 1．运行(61)命令关闭计算机，在PC2与PC3上添加第二块网卡(eth1)，重新启动； D: 2．在PC2与PC3上为第二块网卡分配IP地址，并激活该网络接口，对于PC3，应执行(62)； E: 3．如果使用routed作为路由器进程，则作为路由器的PC2与PC3仅支持路由协议(63)；如果在PC2与PC3上设置静态路由信息并开启路由功能，对于PC2则应执行(64)； F: 4．在PC1和PC4上配置各自的默认同关，对于PC1，应执行(65)。